Table of Contents
Advertisement
Tips on How to Use Your Machine
The curled paper causes paper jam. Flatten the curled paper, then reload it.
Refer to the "
Troubleshooting
Tip!: After loading paper, be sure to specify the paper settings!
After loading paper, be sure to select the loaded paper in Media Type of the printer driver or with the
Paper button on the Operation Panel. If the type of paper is not selected, you may not be able to get the
satisfactory print result.
.
See
Loading Paper
There are various types of paper: paper with special coating on the surface for printing photos with
optimal quality and paper suitable for documents. Media Type of the printer driver has different settings
for each type of paper in advance (such as using ink, ejecting ink, or distance from nozzles) so that you
can print on each paper with the optimal image quality. The Paper button on the Operation Panel, which
is used for making copies, also has some settings similar to Media Type of the printer driver. You can
print with different settings in Media Type of the printer driver or with the Paper button on the Operation
Panel, suitable for each type of loaded paper.
Use the Stop/Reset button to cancel printing!
Tip!: Never press the ON button!
If you press the ON button while printing is in progress, the print data sent from the computer queues in
the machine and you may not be able to continue to print.
Press the Stop/Reset button to cancel printing.
Note
If you cannot cancel printing by pressing the Stop/Reset button while printing from a computer,
open the printer properties dialog box to delete the unnecessary print jobs from the printer status
monitor (Windows).
How to maintain the optimal printing quality?
The key to printing with the optimal printing quality is to prevent the Print Head from drying or clogging.
Always follow the following steps for optimal printing quality.
Follow the procedure below to turn the power off.
1 Press the
ON
button on the machine to turn it off.
2 Be sure that the Power lamp is not lit.
3 Unplug the power cord from the wall outlet, or turn off the extender cable connector.
ON
If you press the
automatically to prevent from drying. If you unplug the power cord from the wall outlet or turn off
the extender cable connector before the Power lamp is turned off, the Print Head will not be
capped properly and this will cause drying or clogging.
To turn off the power, be sure to follow this procedure.
Print periodically!
Just as the tip of a felt pen becomes dry and unusable if it has not been used for a long time,
even if it is capped, the Print Head too, may become dried or clogged if the machine has not
been used for a long time.
We recommend the machine to be used at least once a month.
Note
Depending on the type of paper, ink may blur if you trace the printed area with a highlight pen
or paint-stick, or bleed if water or sweat comes in contact with the printed area.
" in the on-screen manual: Advanced Guide
button to turn off the power, the machine caps the Print Head (nozzles)
Page 95 of 628 pages
.
Advertisement
Table of Contents
