Table of Contents
Advertisement
An Error Code Is Displayed on the LED
(MP260 series)
E, 4, 0
(MP260 series)
E, 4, 1
E, 4, 2
E, 4, 3
E, 4, 4
E, 4, 5
(MP260 series)
E, 4, 6
(MP260 series)
E, 4, 7
(MP260 series)
E, 4, 8
(MP260 series)
E, 5, 0
E, 5, 1
E, 5, 2
E, 5, 3
(MP260 series)
E, 5, 4
(MP260 series)
Power Lamp Flashes Green and Alarm Lamp Flashes Orange
Alternately
When the Power and Alarm lamps flash alternately as shown below, and P and number (error
the Photo Index Sheet
correctly./No images on the
Photo Index Sheet.
Unable to recognize the
memory card when saving
the scanned data on the
memory card.
Unable to save the scanned
images on the memory
card.
The memory card is
removed while saving is in
progress.
The read/write mode is
enabled in the read/write
attribute.
The memory card is not
inserted in the Card Slot.
Scanning the Print Head
Alignment Sheet has failed.
Scanning the Language
Selection Sheet has failed.
The memory card is
inserted in the Card Slot
when you change the read/
write attribute setting.
machine.
The machine may not recognize the file if the
file name or the folder path contains certain
characters. Use only alphanumeric
characters.
Photo data edited or processed on a
computer must be printed from the
computer.
The format of the memory card is not
compatible with this machine. Use the memory
card formatted by the FAT form.
You cannot save the scanned images on the
memory card if the read-only mode is
enabled. Press the Maintenance button
repeatedly until
c appears on the LED, and
then press the Black button to enable the
read/write mode.
Unlock the memory card when you save
the scanned images.
The memory card is full.
After carrying out the above measures, if the
problem continues, turn the machine back
on. If the error is not resolved, the memory
card may be damaged.
Do not remove the memory card while saving is
in progress.
You cannot print images if the read/write mode
is enabled. Press the Maintenance button
repeatedly until
c appears on the LED, and then
Color button to enable the read-only
press the
mode.
Insert the memory card in the Card Slot.
For details on how to insert the memory card,
refer to
Printing from a Memory Card (MP260
.
series)
Make sure that all required boxes on the
head alignment sheet are filled in, and that
the sheet is set in the correct position and
orientation on the Platen Glass.
Make sure the Platen Glass and the Print
Head Alignment Sheet are not dirty.
If the error is not resolved, connect the machine
to the computer and align the Print Head on the
printer driver.
Aligning the Print Head Position
Make sure that all required boxes on the
Language Selection Sheet are filled in, and
that the sheet is set in the correct position
and orientation on the Platen Glass.
Make sure the Platen Glass and the
Language Selection Sheet are not dirty.
When the memory card is inserted in the Card
Slot, you cannot change the read/write attribute
setting. Remove the memory card from the Card
Slot and press the Black or
Page 532 of 628 pages
Color button.
Advertisement
Table of Contents
