Error Message Chart - Canon Stacker-C1 User Manual

High capacity stacker
Table of Contents

Advertisement

Error Message Chart

C
E1
D2
E2
Error Message
CLOSE COVER
TOP COVER
CLOSE COVER
OUTPUT TRAY COVER
REMOVE PAPER FROM
OUTPUT TRAY
REMOVE PAPER FROM
STACKER
UNEVEN STACK
REMOVE STACKER PAPER
/
IF PAPER IS CURLED
PERFORM CURL ADJUST.
STACK TRAY NOT SET
CLOSE GUIDE
STACK GUIDE F. COVER
REMOVE JAMMED PAPER
B
REMOVE JAMMED PAPER
A
A
2
B
1
D3
3
D4
D1
Cause
The top cover is open.
The OUTPUT TRAY cover is
open.
The OUTPUT TRAY is full.
The stack tray is full.
1. The paper is curled.
2. Paper on the stack tray is
leant.
The stack tray is not placed cor-
rectly.
Front cover is closed without
closing the front stack guide
A paper jam occurred in
section.
A paper jam occurred in the
section.
D5
Remedy
Close the top cover
Close the OUTPUT TRAY cover
2
.
Remove the paper from the OUT-
PUT TRAY.
Remove the paper from the stack
tray.
Check the message displayed on
the host machine (printer) control
panel.
Place the stack tray correctly.
Open the front cover and close
.
the front stack guide
3
close the front cover.
B
Open the top cover
the
B guide to remove the
jammed paper. Close the guide
and the cover, and the printing
will be restarted. *1
A
Open the OUTPUT TRAY cover
2
and open the
remove the jammed paper. Close
the guide and the cover, and the
printing will be restarted.
WARNING
When you remove the
sheets from the left
turn-over section, take
care not to be caught
by the roller. Other-
wise, it may lead to
severe injury.
When you remove the
sheets from the stack-
ing section, take care
not to be caught
between the stack
guide and the stack
tray. Otherwise, it may
lead to severe injury.
.
1
, then
3
and open
1
A guide to
Error Messages
3-3
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

C1

Table of Contents