Replacing An Ink Tank - Canon PIXMA MP510 Quick Start Manual

Replacing an Ink Tank

When ink tanks run out of ink, replace them using the following steps.
1
Open the Front Feeder.
2
Make sure that the machine is on, and then
open the Scanning Unit (Printer Cover).
3
Push the tab of the ink tank whose lamp is
flashing fast (A) and remove it.
Do not touch the Print Head Lock Lever (B).
4
Remove the new ink tank from its packaging,
then pull the orange tape in the direction of
the arrow (A) so that the protective film does
not remain on the air hole (B). Then remove
the film completely (C).
16 Replacing an Ink Tank
(B) (A)
(C)
(A)
(B)