Introduction; Selecting The Language For The Lcd - Canon PIXMA MP510 Quick Start Manual

Introduction

Thank you for purchasing the Canon MP510.
This Quick Start Guide uses the following symbols to indicate important information. Always observe
the instructions indicated by these symbols.
Warning
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Caution
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Important
Instructions that must be observed for safe operation.
Trademark Notices
"Windows" and "Internet Explorer" are trademarks of Microsoft Corporation, registered in the United
States and other countries.
"Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
"Adobe" and "Adobe RGB (1998)" are either registered trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
"SmartMedia" is a trademark of Toshiba Corporation.
"MEMORY STICK", "Memory Stick PRO", "MEMORY STICK Duo" and "Memory Stick Pro Duo" are
trademarks of Sony Corporation.
"xD-Picture Card" is a trademark of Fuji Photo Film Co., Ltd.
"MultiMediaCard" is a trademark of Infineon Technologies AG.
"SD Secure Digital memory card" and "miniSD Card" are trademarks of SD Association.
Copyright ©2006 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever
without the express written permission.

Selecting the Language for the LCD

1
Press the COPY button, wait for 5 seconds, and then press the MENU button.
2
Press the ] button once, then press the OK button.
3
Press the ] button once, then press the OK button.
4
Press the } button three times, then press the OK button.
If the Bluetooth Unit is connected, press the } button four times, then press the OK button.
5
Use the { or } button to select the language you want to be displayed, then press
the OK button.
Introduction 1