Description Of Wps Settings - EE Brightbox User Manual

Even if WPS is enabled, you can still connect to your computer using the password
method.
To access the WPS admin pages in the Bright Box router:
1. Login to the router's admin pages.
2. Click on the Basic Set-Up tab and then select Wireless Settings from the left hand
menu.
3. Select Wi-Fi Protected setup from the left hand menu:
Description of W PS settings
The following table contains a description of the fields and options in the Wi-Fi protected
setup page. Note that the full page contents will only be visible if the 'Wi-Fi Protected Setup
(WPS)' option is set to 'Enable'.
Field
Wi-Fi Protected
Setup (WPS)
Description
This option is used to configure the Wi-Fi Protected Setup
(WPS) feature on the Bright Box router.
WPS is set to disabled by default.
Select 'Enable' to switch on the WPS feature on the
router. You may now connect with WPS PBC, WPS PIN or
by the normal manual password method when making a
wireless connection to the router (WPS availability is
dependent on the wireless adapter also supporting the
feature).
Select 'Disable' to switch off the WPS feature on the
router. You can only connect with the manual password
EE Bright Box User Manual
80