You Can Now Connect Your Devices; Setting Up Your Fibre Broadband; Disconnect Old Equipment; Engineer Visit - EE Brightbox User Manual

Please note that if you're redirected to the 'Nearly there!' holding page in your browser,
you may need to wait a few more minutes for us to set up your router. If after 5 minutes, the
'Nearly there!' text is still visible when you reopen your browser window, reboot your PC and
then reopen the browser window again, you should now be able to view web pages. If this still
doesn't work, you can manually enter your broadband username and password in the router
user interface and make a connection to the Internet (see how to manually update the
broadband username and password on page 52)

You can now connect your devices

You can now connect your devices to your Bright Box router. Choose either wireless or wired
connection and follow the steps on pages 23 and 25

SETTING UP YOUR FIBRE BROADBAND

Follow these steps to set up your Bright Box Wireless Router for your EE Fibre broadband
service.
Make sure that your Fibre broadband has been installed – the engineer will confirm that
your line is ready to go
Disconnect Old Equipm ent
If you've already got a broadband modem or router connected to your line, unplug the power
supply and all other cables and put them to one side for now.

Engineer Visit

1. The engineer will change your telephone socket and connect the modem for you.
2. Connect the black Ethernet cable, provided, to the modem:

Connect and turn on your router

1. Connect the other end of the black Ethernet cable into the red WAN port on your router:
2. Connect the two parts of the power supply together:
EE Bright Box User Manual
18