Chapter 6: Bright Box Basic Set-Up Pages; Broadband Settings; Description Of Broadband Settings - EE Brightbox User Manual

CHAPTER 6: BRIGHT BOX BASIC SET-UP PAGES

Click the Basic Set-Up tab to access the Basic Set-Up admin pages. You can configure your
basic broadband and wireless settings in addition to basic USB File Sharing features on these
pages:

BROADBAND SETTINGS

Clicking on the Basic Set-Up tab will display the Broadband Settings page. You can also
access this page by clicking on the Broadband Settings item in the left hand navigation
menu when inside the Basic Set-Up tab.
This page contains basic settings to connect to your EE broadband service. The Broadband
Username and Password can be found here, as well as ISP settings, DNS and MTU settings.

Description of Broadband Settings

The following table contains a description of the fields and options in the Basic Set-Up
Broadband Settings page:
Field
Broadband Type
Description
This setting allows you to configure the network setting
type for you Internet connection. For EE ADSL broadband
this should be set to 'ADSL'. For EE Fibre broadband this
should be set to 'Fibre/Ethernet'.
Select 'ADSL' for a standard PPPoA or PPPoE ADSL
connection (including EE broadband). This setting requires
entry of a Broadband Username and Password in order to
establish an Internet Connection
Select 'Fibre/Ethernet' for the router to be configured for
Bridging, Routing (if you only want to use the Bright Box
as a router and not a modem) or PPPoE Fibre Ethernet
modes. The easiest way to configure the router for EE
EE Bright Box User Manual
49