Description Of Intrusion Detection Settings - EE Brightbox User Manual

Description of Intrusion Detection settings:

The table below contains a description of the settings on the Intrusion Detection page :
Section
SPI and Anti-DoS firewall
protection
TCP Connection
UDP Session
FTP Service
H.323 Service
Description
This option allows you to configure the SPI and Anti
Denial of Service protection on the router firewall.
By default the SPI firewall and Anti-DoS setting is
enabled to protect your router and network
Select 'Enable' to switch on SPI (Stateful Packet
Inspection) firewall and Anti Denial of Service
settings on the router. Selecting this option will tick
all of the individual SPI service rules.
Select 'Disable' to switch off the SPI and Anti Denial
of Service protection on the router. Selecting this
option will untick all of the individual SPI service
rules.
This option enables or disables the SPI firewall for all
TCP (Transmission Control Protocol) traffic.
This option enables or disables the SPI firewall for all
UDP (User Datagram Protocol) traffic.
This option enables or disables the SPI firewall for all
FTP (File Transfer Protocol) traffic.
This option enables or disables the SPI firewall for all
EE Bright Box User Manual
156