Description Of Port Trigger Settings - EE Brightbox User Manual

Description of Port Trigger settings

The table below contains a description of the settings on the Port Triggers page :
Section
Number
Trigger Port
Trigger Type
Public Port
Description
This field is the index for the port trigger entry. You
can configure up to 10 port triggering rules on the
router.
This field is used to configure the trigger port that
an application uses to open the incoming public
ports.
Please refer to the instructions supplied with your
software to determine which trigger port you should
be using.
This dropdown is used to configure the traffic type
on the trigger port.
Select 'TCP' for Transmission Control Protocol traffic
triggering
Select 'UDP' for User Datagram Protocol traffic
triggering.
Please refer to the instructions supplied with your
software to determine which trigger traffic type you
should be using.
This field is used to configure the public incoming
ports that are opened when the trigger port is
activated by your software.
You can enter a single public port, multiple ports
EE Bright Box User Manual
133