Selector Lever In Centre Position; Selec Tor Lever In + Or -; Selector Lever In A/M, R; Electronically Controlled Driving Programmes In Automatic Mode - Vauxhall Corsa & Combo Owner's Manual

Selector l ev er i n cent re p osi tion
When the selector lev er is m ov ed from N to
the m id position with the foot b ra ke
depressed, Easytronic is in Automatic
mode and first gear is engaged. The
transm ission display shows "A" . When the
foot brak e is released, the vehicle b egins to
"creep" . If the foot b ra ke is not depressed,
"A" fla shes. Press the accelerator ped al
direc tly to drive away or return the selector
lev er to N and repeat the process with the
foot brake dep ressed.
In automatic mode, the transmission shifts
into other gears a utomatica lly based on
driving conditions.
In Manual mode the gears can be shifted
manually. The transmission display shows
the currently engaged gear.
If the engine speed is too low the Easytronic
will automatically shift to a lower g ear even
in Manua l mode. This prevents the engine
from stalling.

Selec tor lever in + or -

+
Shift to a higher gear.
-
Shift to a lower gear.
If a higher g ear is selected when the
running speed is too low, or a lower gear
when the speed is too high, no shift is
effected. This prev ents the engine from
running at too low or too high rev s.
Gears can be skipped by jog ging the
selector lev er repeatedly at short intervals.
When the vehicle is in Automatic mode,
Easytronic shifts to Manual mode when the
selector lever is set to position
tra nsmission display shows the currently
selected gear.
Selector lev er in A/M
S witc h between Automatic and Manua l
mode.
Selector lev er in R
Reverse gear. Engage only when the
vehicle is stationary . Press the button on
the selector lever a nd select R. The
transmission displa y will show "R".
If R is selected when the vehicle is in motion,
"R" flashes in the transmission display and
no gear is engaged.
Electronically controlled driving
programm es in automatic mode
z By m eans of delay ed gear cha nging
(higher engine speed s) following a cold
start, the opera ting temperature
programme quickly and automatically
bring s the catalytic conv erter to the
temperature required for optimum
pollutant reduction.
+ -
or . The
z Adaptive programmes autom atically
adapt gear shifting to suit the d riv ing
cond itions, suc h as if the vehic le is
tow ing a carav an/trailer, ha s a hig h
payload, or is being driv en on inclines.
127