Vauxhall Corsa & Combo Owner's Manual page 190

On som e vehicles, the jac king points are
concealed by flap s. Fold the flap
outwards.
188
4. Before attaching jack 3, set to required
height by hand. Fit jack arm at front – or
rea r – in such a way that jack claw (arrow
in illustration) goes around the v ertical
ridge and engag es into the recess in the
ridge.
When turning the crank , ensure that the
edge of the ja ck base is planted on a
non-slippery surface and is vertica lly in
line with the contact point.
If this is not the ca se, carefully lower the
vehicle immediately and reposition the
jack.
Raise vehicle b y turning crank handle.
5. Unscrew w heel bolts and put somewhere
where the thread s w ill not b e soiled.
6. Change the wheel. For inform ation on
the spare wheel – see page 182; for
information on the temporary spare
wheel – see pages 164, 183, 249.