Vauxhall Corsa & Combo Owner's Manual page 193

4. Screw the compressor air hose to the
connection on the sealant bottle.
5. Fit the sealant bottle in the retainer on
the compressor.
Set the compressor near the ty re in such
a way tha t the sealant b ottle is up rig ht.
6. Remove the v alve cap from the defective
ty re.
7. Sc rew the filler hose to the ty re v alve.
8. The switch on the compressor m ust be
set to §.
9. Plug the c om pressor connec tor into the
accessory socket or the ciga rette lig hter
socket. Accessory sockets – see page 75.
10. Switch on ignition.
11. Set the rocker switch on the com pressor
to I. The tyre is filled with sea lant.
12. While the sealant bottle drains (a pprox.
30 seconds) the pressure ind icator on
the com pressor briefly points to 6 b ar.
Pressure then sink s a gain.
13. All of the sea la nt is pump ed into the
tyre. Afterwards, the tyre is filled with
air.
14. The presc rib ed ty re pressure (see
page 249) should b e reached within
10 m inutes. Switch off the com pressor
when the correct pressure is obtained.
191