Ellipsoidal headlight sys tem ,
dipped be am
Headlight sy stem with sep arate bulbs for
dipped beam (inner bulb s) and m ain beam
(outer bulbs).
1. Open bonnet and engage supp ort.
2. When replacing bulb s on the left-hand
side, open the cov er of the fuse box.
When rep la cing bulbs on the right-hand
side, d etach the air hose from the a ir
filter. Lift off the filler neck of the
headlight wa sh reservoir 3.
3. Rem ov e the headlight protective cover
by p ressing the catch and pulling the
cover downward and off.
4. Detach plug connector from bulb.
5. Disengag e the spring wire clip from the
lugs and swivel it aside.
6. Remove bulb from reflector housing.
7. When fitting a new bulb, engage the
lugs in the recesses on the reflector
without touc hing the glass.
8. Engage spring wire clip, plug connector
onto bulb.
9. Place headlight protec tiv e cov er in
position and close.
10. After replacing bulbs on the left-hand
sid e, close the cover of the fuse b ox .
After replac ing bulbs on the right-hand
sid e, reattach the air hose to the air
filter. Refit the filler neck of the
headlight w ash reservoir 3.
205