Wrong Paper Size - Brother MFC-J430W Basic User's Manual

Error Message
Paper Jam
Unable to CleanXX
Unable to Init.XX
Unable to PrintXX
Unable to ScanXX
Wrong Ink Colour

Wrong Paper Size

Cause
Paper is jammed in the machine.
The machine has a mechanical
problem.
—OR—
A foreign object such as a paper clip or
ripped paper is in the machine.
A colour ink cartridge has been
installed in the Black ink cartridge
position.
The Paper Size setting does not
match the size of paper in the tray. Or,
you did not set the paper guides in the
tray to the indicators for the paper size
you are using.
Troubleshooting
Action
Remove the jammed paper by
following the steps in Printer jam or
paper jam uu page 66.
Make sure the paper length guide is
set to the correct paper size.
DO NOT extend the paper tray when
you load A5 or smaller size paper.
(The extendable tray is only available
for some countries.)
Open the scanner cover and remove
any foreign objects and paper scraps
from inside the machine. If the error
message continues, see Transferring
your faxes or Fax Journal report
uu page 64 before disconnecting the
machine so you will not lose any
important messages. Then,
disconnect the machine from the
power for several minutes and
reconnect it.
Check which ink cartridges are not
matched by colour to their ink
cartridge positions and move them to
their correct positions.
1 Check that the paper size you
choose matches the size of paper
in the tray.
2 Make sure you loaded the paper in
a Portrait position, by setting the
paper guides at the indicators for
your paper size.
3 After you have checked the paper
size and the paper position, press
Mono Start or Colour Start.
B
63