Fax Redial; Additional Dialling Operations; Outgoing Call History - Brother MFC-J430W Basic User's Manual

Chapter 7

Fax Redial

If you are sending a fax manually and the line
is busy, press Hook, Redial/Pause, and then
press Mono Start or Colour Start to try
again.
Redial/Pause only works if you dialled from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial up to three
times at five minute intervals.
a
Press Redial/Pause.
b
Press a or b to choose the number you
want to redial.
Press OK.
c
Press a or b to choose Send a fax.
Press OK.
d
Press Mono Start or Colour Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
44
Additional Dialling
7
Operations

Outgoing Call history

The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
Speed Dial, or delete from the history.
a
Press Redial/Pause.
You can also choose Outgoing Call
by pressing
b
Press a or b to choose the number you
want.
Press OK.
c
Do one of the following:
 To send a fax, press a or b to choose
Send a fax.
Press OK.
Press Mono Start or Colour Start.
 If you want to store the number,
press a or b to choose
Add to Speed Dial.
Press OK.
(uuAdvanced User's Guide: Storing
Speed Dial numbers from Outgoing
Calls)
If you want to delete the number from

the Outgoing Call history list, press
a or b to choose Delete.
Press OK.
Press 1 to confirm.
d
Press Stop/Exit.
(FAX).
7
7