Transmission Verification Report - Brother MFC-J430W Basic User's Manual

Transmission Verification
Report
You can use the Transmission Verification
Report as proof that you sent a fax. This
report lists the sender's name or fax number,
the time and date of transmission, duration of
transmission, number of pages sent, and
whether or not the transmission was
successful.
There are several settings available for the

Transmission Verification Report:

 On: Prints a report after every fax you
send.
 On+Image: Prints a report after every fax
you send. A portion of the fax's first page
appears on the report.
 Off: Prints a report if your fax is
unsuccessful due to a transmission error.
Off is the default setting.
 Off+Image: Prints a report if your fax is
unsuccessful due to a transmission error.
A portion of the fax's first page appears on
the report.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Report Setting.
Press OK.
d
Press a or b to choose Transmission.
Press OK.
e
Press a or b to choose On, On+Image,
Off or Off+Image.
Press OK.
f
Press Stop/Exit.
Note
• If you choose On+Image or Off+Image
4
the image will only appear on the
Transmission Verification Report if Real
Time Transmission is set to Off.
(uuAdvanced User's Guide: Real Time
Transmission)
• If your transmission is successful, "OK" will
appear next to "RESULT" on the
Transmission Verification Report. If the
transmission is not successful, "ERROR"
will appear next to "RESULT".
Sending a fax
4
27