Setting The Sensitivity Of Station Seek Tuning; Storing Stations - Blaupunkt New Orleans MP58 Operating And Installation Manual

Radio mode
To change the set frequency in small incre-
ments,
u
briefl y press the
To change the set frequency quickly,
u
press and hold down the
4 for a longer period of time.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
Note:
The convenient RDS function and PTY
must be activated before you can use
this feature.
u
Press the or
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
u Press the MENU•OK button 5.
u
Press the or
edly until "TUNER MENU" appears on
the display.
60
or button 4.
or button
button 4 to switch
button 4 repeat-
u button 4 to open the
Press the
menu.
u
Press the or
until "SENSITIVITY" appears on the dis-
play.
u button 4 to open the
Press the
menu.
The display shows the currently set sensi-
tivity level. "SENS HI6" indicates the high-
est sensitivity, "SENS LO1" the lowest.
u
Set the desired sensitivity with the
button 4.
or
When you have fi nished making your chang-
es,
u press the ESCAPE button ;.
Notes:
• This setting is only possible in radio
mode.
• The device stores the sensitivity value
set in the respective FM and AM wave-
band.

Storing stations

Storing stations manually
u
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 6 9 for longer than 2 sec-
onds to assign the station to that but-
ton.
button 4 repeatedly