Blaupunkt New Orleans MP58 Operating And Installation Manual page 39

Adjusting the display settings
Mixing a colour for the display
illumination
To customise the display illumination to suit
your tastes you can mix a colour yourself
using the three primary colours red, green
and blue (RGB).
u Press the MENU•OK button 5.
u
Press the or
until "DISPLAY MENU" appears on the
display.
u button 4 to open the
Press the
menu.
u
Press the or
until "USER COLOUR" appears.
u Press the button 4 to open the RGB
menu.
"R", "G", and "B" are displayed with the cur-
rent values. The setting for "R" is activated.
You can adjust a value from 0 to 16 each for
every colour component.
u
Press the or
the value of a colour component.
u
Press the or
between the colour components.
When you have fi nished making your chang-
es,
u press the MENU•OK button 5.
u Press the ESCAPE button ; to exit
the menu.
82
button 4 repeatedly
button 4 repeatedly
button 4 to adjust
button 4 to switch
Selecting a display illumination during a
colour scan
u Press the MENU•OK button 5.
u
Press the or
until "DISPLAY MENU" appears on the
display.
u button 4 to open the
Press the
menu.
u
Press the or
until "COLOUR SCAN" appears.
button 4 to start the col-
u
Press the
our seek.
The device starts changing the display illu-
mination colour.
To select the currently set colour,
press the MENU•OK button 5.
u
button 4, you can start the
With the
colour seek again and select a different col-
our.
If you found and selected the desired col-
our,
u press the ESCAPE button ;.
Switching the constant colour change
for the display illumination on/off
(SCAN)
You can select a constant colour change as
the colour of the display illumination. If the
colour change is activated, the display col-
our changes constantly. The colour change
is switched on or off in the menu.
u Press the MENU•OK button 5.
u
Press the or
until "DISPLAY MENU" appears on the
display.
u button 4 to open the
Press the
menu.
button 4 repeatedly
button 4 repeatedly
button 4 repeatedly