Setting The Left/Right Volume Distribution (Balance); Adjusting The Front/Rear Volume Distribution (Fader); Preamplifi Er Output (Preamp-Out/Sub-Out); Adjusting Sub-Out - Blaupunkt London MP48 Operating And Installation Manual

Sound
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribution
(balance),
u press the AUD button >.
"BASS" appears on the display.
u
Press the or
until "BAL" appears on the display with
the current setting.
u
Press the or
just the left/right volume distribution
(RIGHT/LEFT).
u Press the AUD button > to exit the
menu.
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distribution
(fader),
u press the AUD button >.
"BASS" appears on the display.
u
Press the or
ly until "FADER" appears on the display
with the current setting.
u
Press the or
the front/rear volume distribution
(REAR/FRONT).
u Press the AUD button > to exit the
menu.
62
button 4 repeatedly
button 4 to ad-
button 4 repeated-
button 4 to adjust
Preamplifi er output
(Preamp-Out/Sub-Out)
You can use the preamplifi er outputs
(Preamp-Out) of the car sound system to
connect external amplifi ers. In addition,
you can connect an amplifi er for operating
a subwoofer to the integrated dynamic low-
pass fi lter of the device (level and cut-off
frequency can be adjusted).
For this purpose, the amplifi ers must be
connected as described in the installation
instructions.

Adjusting Sub-Out

The subout level can be adjusted in 8 in-
crements (0 to +7), and 4 cut-off frequen-
cies can be selected: 0 Hz (linear), 80 Hz,
120 Hz and 160 Hz.
u Press the AUD button >.
"BASS" appears on the display.
u
Press the or
until "Sub-Out" appears on the display.
button 4 once to reach
u
Press the
the Sub-Out submenu.
u or button 4 repeatedly
Press the
until the desired frequency appears on
the display.
u
Press the or
the level between 0 and +7.
When you have fi nished making your chang-
es,
u press the AUD button > twice.
Preamplifi er output
button 4 repeatedly
button 4 to adjust