Connecting The Power Cable And Telephone Line Cord; Removing - Binatone iHome Phone User Manual

Ihomephone_IFU_EN.book Page 18 Thursday, June 9, 2011 2:21 PM
GETTING STARTED
5.6

Connecting the power cable and telephone line cord

1 Plug one end of the power cable and telephone line cord to the power jack and phone
jack respectively on the bottom of the DECT base station.
2 Plug the other end into a power and telephone wall socket.
5.6.1 If you have a Broadband line
If you connect your telephone to a line with a broadband connection, you will need to
insert a micro-filter between the telephone and the telephone line, otherwise you may get
interference between the telephone and the broadband, which could cause problems. In a
home with broadband, every telephone must have a micro-filter connected, not just the
one at the telephone point that your modem is connected to. If you need more broadband
micro-filters, contact your broadband supplier.
5.7 Removing back cover
1 Use the Stylus pen to gently press the keylock to release the spring lock.
18 Binatone Helpline: 0845 345 9677 in UK