Battery Low Warning; Battery Performance; Connecting The Power Cable And Telephone Line Cord - Binatone Brick 4home edition User Manual

Table of Contents

Advertisement

GETTING STARTED
5.4

Battery low warning

If you hear a warning beep every 30 seconds during a call, you
will need to recharge the handset before you can use it again.
When charging,
5.4.1

Battery performance

Under ideal conditions, fully charged batteries should give about
10 hours talk time or 200 hours standby time on a single charge.
Note that new batteries will not reach full capacity until they have
been in normal use for several days.
To keep your batteries in the best condition, leave the handset off
the base for a few hours at a time.
Drain the batteries completely at least once a week before
charging will help to prolong battery life.
The charge capacity of rechargeable batteries will reduce with
time as they wear out, giving the handset less talk/standby time.
Eventually they will need to be replaced.
After charging your handset for the first time, subsequent charging
time will be about 6 hours a day. Batteries and handset may
become warm during charging. This is normal.
5.5

Connecting the power cable and telephone line cord

1 Plug one end of the power cable and telephone line cord to
the power jack and phone jack respectively on the back of the
DECT base station.
2 Plug the other end into a power and telephone wall socket.
15
icon will scroll on the display.
Binatone Help: www.meetthebrick.com

Advertisement

Table of Contents
loading

Table of Contents