Table of Contents
Advertisement
Ihomephone_IFU_EN.book Page 40 Thursday, June 9, 2011 2:21 PM
DECT Settings
8.1.2
Registering your iHome Phone to another DECT Base
The DECT base to which you wish to register the iHome Phone must have a FREE
Handset location. You must also know the PIN code of the base.
1 Set the DECT base into Registration Mode.
2 On your iHome Phone, press
3 Tap Settings > Dect Settings > Handset Settings > Registration.
4 Tap to select the base number and tap Register.
The iHome Phone will start to search for the DECT base.
5 Tap on the Enter Pin box to launch the onscreen keyboard.
6 Enter the PIN code of the DECT base and tap Done.
If successful, a message will appear.
B
7 Press
to return to the previous screen.
Note
If the PIN of the DECT base is set as "0000" (default), the iHome Phone will register to the
DECT base without prompting for the PIN.
8.1.3
Synchronize your iHome Phone with another DECT base
1 On your iHome Phone, press
2 Tap to select Settings > Dect Settings > Handset Settings > Select Base.
40
M
.
M
.
Binatone Helpline: 0845 345 9677 in UK
Advertisement
Table of Contents
