Table of Contents
Advertisement
Ihomephone_IFU_EN.book Page 42 Thursday, June 9, 2011 2:21 PM
DECT Settings
8.2.1
Change PIN code
1 On your iHome Phone, press
2 Tap Settings > Dect Settings > Base Settings.
3 Enter the PIN code and tap Authenticate. (Note: The default PIN code is 0000)
4 Tap Change Pin Code.
5 Enter the new pin code using the onscreen keyboard and tap Modify.
8.2.2
Deregister Handset
1 On your iHome Phone, press
2 Tap Settings > Dect Settings > Base Settings.
3 Enter the PIN code and tap Authenticate.
4 Tap Deregister Handset.
5 Tap to select a handset and tap Deregister.
8.2.3
Reset Base Settings to Default
1 On your iHome Phone, press
2 Tap Settings > Dect Settings > Base Settings.
3 Enter the PIN code and tap Authenticate.
4 Tap Reset to Default.
5 Tap Reset to confirm.
8.2.4
Set Dialling Mode
1 On your iHome Phone, press
2 Tap Settings > Dect Settings > Base Settings.
3 Enter the PIN code and tap Authenticate.
4 Tap Dialing Mode.
5 Tap to select Tone or Pulse.
8.2.5
Set Flash Duration
1 On your iHome Phone, press
2 Tap Settings > Dect Settings > Base Settings.
3 Enter the PIN code and tap Authenticate.
4 Tap Flash Duration.
5 Tap to select Short, Normal or Long.
42
M
.
M
.
M
.
M
.
M
.
Binatone Helpline: 0845 345 9677 in UK
Advertisement
Table of Contents
