Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Read these notes first
Choosing a site
The base unit and charger pod(s) can be wall mounted
for the base
or placed on a level surface, in a position where:
unit and
the mains adapter plug will reach an easily accessible
charger pod
230-V
switched mains supply socket — never try
AC
to lengthen the mains power cable
the base unit's telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
it is not close to another telephone — this can cause
radio interference
it is not close to a sink, bath or shower, or anywhere
else where it might get wet
it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
Radio signals
To use your handset and base unit together, you must
between
be able to establish a radio link between them. Be
handset and
aware that:
base unit
Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
Other solid structures, like walls, may reduce the
signal strength.
Mains power
IMPORTANT — The Lifestyle 100 base unit and charger
connection
pod must be used with the mains adapter supplied with
the unit. Using any other adapter will result in non-
compliance with EN60950, and will invalidate any
approval given to this apparatus.
Battery safety
IMPORTANT — Only use the rechargeable batteries
supplied with the handset.
NEVER use non-rechargeable batteries — they may
burst, causing damage.
4
E:\Binatone2004\Lifestyle\Lifestyle_100\Lifestyle-100_UK_01.vp
14 April 2004 15:14:02
Installation and set-up
1
Choose a suitable site for the
base unit See page 4
2
Connect the mains power lead
and the telephone line cord into
the underside of the base unit
Use the telephone line
cord supplied with
your Lifestyle 100 —
do not use any other
telephone line cord
3
Plug the mains adapter into a
230 V AC, 50 Hz mains socket,
with the switch on the socket
set to OFF
See the note
on page 4
4
If you have one or more charger pods ...
Plug the mains adapter into a 230 V AC,
50 Hz mains socket, with the switch on
the socket set to OFF
See the note
on page 4
5
Switch on at the mains socket(s)
Binatone Help Line: 0845 345 9677
(Local Call rate)
5
Advertisement
Table of Contents
