Cleaning With Attachments - Bissell CLEANVIEW DEEP CLEAN 42U7 SERIES User Manual

O
perations

Cleaning with attachments

Your CleanView
comes equipped with a hose and at
least one attachment for cleaning
stairs, upholstery, and more.
1. Important! If using to clean uphol-
stery, check upholstery tags.
A. Check manufacturer's tag before clean-
ing. "W" or "WS" on the tag means
you can use your deep cleaner. If the
tag is coded with an "X" or an "S"
(with a diagonal stripe through it), or
says "Dry Clean Only", do not proceed
with any deep cleaning machine. Do
not use on velvet or silk. If manufactur-
er's tag is missing or not coded, check
with your furniture dealer.
B. Check for colourfastness in an
inconspicuous place.
C. If possible, check upholstery stuffing.
Coloured stuffing may bleed through
fabric when wet.
D. Plan activities to allow upholstery
time to dry.
E. Vacuum thoroughly to pick up loose
debris and pet hair. Use a vacuum
with a brush attachment and a crevice
tool to clean in fabric folds.
2. Follow the instructions on page 10 for filling
the 2-in-1 water tank and the formula tank.
3. Set ReadyTools dial to the "TOOLS"
setting. This will allow spray and suction
from the hose.
4. Set custom clean dial for heavy traffic,
normal clean, light clean, or water rinse
as desired.
5. Attach the cleaning tool to the end of the hose.
6. Plug in and turn on the power switch and
heater (if desired).
7. Clean by pressing the spray trigger
to spray solution onto the area to be
cleaned. Slowly move the tool back and
forth over the soiled surface. Release
the spray trigger to suction soiled water.
Continue to clean in the area, working
in small sections, until no more dirt can
be removed. Rinse (optional) and
suction as needed.
Caution: Do no overwet.
w w w . b i s s e l l . c o m
® Deep Clean machine
Manufacturer's tag
5.
WARNING:
reduce the risk of injury, be extra
careful when cleaning stairs. Make
sure machine is secure and level.
To
13