Cleaning With Attachments - Bissell 86T3 Manual

Cleaning with Attachments

Upholstery Cleaning Tips
If using to clean upholstery, check upholstery tags.
• Check manufacturer's tag before cleaning. "W" or "WS" on the tag means you can use your deep
cleaning machine. If the tag is coded with an "X" or an "S" (with a diagonal stripe through it) or
says "Dry Clean Only", do not proceed with any deep cleaning machine. Do not use on velvet or
silk. If manufacturer's tag is missing or not coded, check with your furniture dealer.
• Check for colorfastness in an inconspicuous place.
• If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
• Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment
and a crevice tool to clean in fabric folds.
1.
Connect solution hose to
the hose connection point on
machine, next to Flow Indicator.
Insert hose and turn clockwise
until locked into place.
4.
Clean by pressing the
red trigger to spray solution
onto the area to be cleaned.
Slowly move the tool back and
forth over the soiled surface.
Caution: Do not overwet.
WARNING
6 BISSELL.com
2.
Open Hose Latch on the
front of the machine and insert
hose into place. Turn clockwise
until locked into place.
5.
Release the trigger to
suction soiled water. Continue
to clean in the area, working in
small sections, until no more
dirt can be removed.
To reduce the risk of injury, use extra care when cleaning on stairs. Keep machine on a level surface.
3.
Attach the cleaning tool to
the end of the hose.