Registration; Reset Your Phone - Binatone iDECT C3i system User Manual

7.5

Registration

IMPORTANT: When you purchase an iDECT C3i system, all handsets are
already registered to the base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or if a
handset has become faulty.
You can register additional handsets to have up to five handsets per base unit,
with each handset's number (1 to 5)
can only be registered to one base.)
To register a new handset to your base:
1. Press and hold <PAGE> on the base station for more than five seconds, to
put the base station into registration mode. It will stay in registration mode
for about 1 minute, so the following handset sequence must be completed
within this time.
2. Press <MENU> and <UP/DOWN> to select REGISTRATION.
3. Press <OK> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> to confirm, and the display will show SEARCHING.
If the handset registration is successful, you will hear a confirmation tone and
the <antenna icon> will stop flashing.
The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the
handset registration is unsuccessful, the <antenna icon> will still flash.
7.6

Reset Your Phone

You can reset your phone to the default settings . After a reset, all your
personal settings , call list entries, redial list entries, and answering machine
messages will be deleted, but your phonebook remains unchanged.
1. Press <MENU> and <UP/DOWN> to select DEFAULT.
2. Press <OK> and you are requested to enter the 4-digit system PIN.
3. Enter the 4-digit system PIN.
4. Press <OK> to display CONFIRM?
5. Press <OK> to confirm, and the phone will be reset to its default settings.
shown on its display. (Note: each handset
24