Ending A Call; Adjust Earpiece Volume; Paging The Handset; Mute - Binatone iDECT C5i System User Manual

Ending a call

B
Press HANG-UP
Note: Auto hang-up mode is set to On by default. You can simply
replace the handset on the charging cradle to end the call without
having to press HANG-UP
mode. To turn off this mode, see page 22.

Adjust earpiece volume

.
You may adjust the earpiece volume by pressing UP
during a call.
There are three volume levels to choose from. When the maximum or
minimum volume level is reached, the phone beeps twice.

Paging the handset

p
1 Press FIND
p
2 To stop paging, press FIND
handsets.

Mute

You can mute the microphone during a call and talk to someone else
without your caller hearing you.
m
1 During a call, press MENU/OK/MUTE
m
2 Press MENU/OK/MUTE
iDECT Help Line (for UK only): 0845 345 9677 (Local Call rate)
B
The total call duration is displayed for 5 seconds.
p
on the base unit.
All handsets registered to the base will ring for up to 30 seconds.
The display shows
.
B
and the handset returns to standby
p
again or press any key on any of the
m
Mute On.
m
again to unmute the microphone.
u
or DOWN
to mute the microphone.
d
7