Figure 40. Pv Module Side Clamps & Plastic End Caps; Figure 41. Typical Structure; Figure 42. Profile Connections - Baxi Solargen PHOTOVOLTAIC Manual

Figure 40. PV module side clamps & plastic end caps

Figure 41. Typical structure

Figure 42. Profile connections

7. SUPPORTING STRUCTURE ASSEMBLING MANUAL
The PV modules should be clamped to the sides of the frame using the
side clamps & nuts & bolts supplied. The plastic end caps should then be
pushed into the ends of the profiles.
The following figures present the typical supporting structures for flat
roofs for 2 and 4 modules.
(Figure 41)
To connect the A frames together use the connection profile piece con-
nected with M10 stainless steel nuts & bolts (supplied).
(Figure 40)
(Figure 42)
Solargen solar PV
25