Table of Contents
Advertisement
Figure 37. Transverse profile mounting
Figure 38. A frame bracing
Figure 39. PV module centre clamp
24
Solargen solar PV
7. SUPPORTING STRUCTURE ASSEMBLING MANUAL
The mounting of the transverse A frame profile is completed using a
stainless steel M10 nuts & bolts (supplied).
The A frames are braced using the 30x8mm profile, use the M10 nuts
supplied.
(Figure 38)
The centre clamps are fitted to the frame with M8 nuts & bolts (supplied).
(Figure 39)
(Figure 37)
Advertisement
Table of Contents
