Table of Contents
Advertisement
Original message is sent back to the RCM
Description: Via this answer the
has been switched off...)
Example:
The
RCM
<STX> <TYPE> <ADDRH> <ADDRL>
Message
The second
command is passed to
<STX> <TYPE> <ADDRH> <ADDRL>
Answer
If the internal logic control of a
mote control interface are short-circuited, such that all other remote control devices
can still be addressed. Pay attention that during the addressing procedure all
active, in order to prevent confusion in the addresses.
recognizes that the desired RCS cannot be addressed (might be it
RCM
has sent the following command:
m
0
2
cannot be addressed, and via the closed remote control ring the original
RCS
again.
RCM
m
0
2
RCS
<Body>
<STATH> <STATL <CHKH> <CHKL> <ETX>
t
<Body>
<STATH> <STATL <CHKH> <CHKL> <ETX>
t
detects an error, the input and output of its re-
4
3
4
3
are
RCS
Advertisement
Table of Contents
