Table of Contents
Advertisement
Command "k": Disabling auto switch
Description: Via this command the
The
RCS
register about the auto switch status.
Example:
The command
<STX> <TYPE> <ADDRH> <ADDRL>
Message
case 1:
auto switch was already disabled: nothing changes
case 2:
auto switch has been enabled before and is now disabled
Since this command only affects the auto switch, the status of the inputs and outputs does
not matter and are assumed 1. The assumptions are written in italic. Then the status re-
gister looks like this:
Status
Auto Switch
0
In both cases the acknowledge sent from the
e
<STX> <TYPE> <ADDRH> <ADDRL>
Acknowledg
Result:
auto switch functionality is disabled.
tells the
RCM
executes the command and sends the acknowledge which informs via the status
is sent to the second
k
m
0
2
Out2
Out1
true
true
1
1
RCS
m
0
2
of class m to disable auto switch
RCS
:
RCS
<Body>
<STATH> <STATL <CHKH> <CHKL> <ETX>
k
Reserved Out2
Out1
target
target
0
1
to the
is the same:
RCM
<Body>
<STATH> <STATL <CHKH> <CHKL> <ETX>
k
6
3
a
Prsnt2 Prsnt1
1
1
1
f
d
6
Advertisement
Table of Contents
