Table of Contents
Advertisement
2.2 Assign ing inputs to outputs
H
DXD is operated by means of remote control, and the inputs are routed to the output via
ERMES
the respective command, cf.
The following schematics show the multiple possibilities for assigning an input to an output. For a
clear arrangement, the connections which can be established in parallel are indicated by gray
dashed lines.
Input 1
Input 2
Input 1
Input 2
2.3 Remot e Control
H
DXD is controlled by a serial interface. The remote control is integrated in X Window
ERMES
(see
7.3.3 User's Manuals
C
). The protocol is accessible for individual applications.
ONTROL
The general concept of remote control, i. e. cabling, connection settings and protocol are described
separately in chapter
5.3 Switching commands
Output 1
Output 2
Output 1
Output 2
) and available as application for Windows NT/2000/XP (H
4 Remote Control.
.
Input 1
Input 2
Input 1
Input 2
Output 1
Output 2
Output 1
Output 2
Figure 2-2
assigning inputs to output
R
-
ERMES
EMOTE
Advertisement
Table of Contents
