Optical Drive - HP 550 Maintenance And Service Manual

4. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE:
memory module slot.
Reverse this procedure to install a memory module.

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.
Description
Supports the following PATA optical drives:
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
DVD/CD-RW Combo Drive
DVD-ROM Drive
Optical drive connector board (PATA)
Supports the following SATA optical drives:
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
DVD/CD-RW Combo Drive
DVD-ROM Drive
Optical drive connector board (SATA)
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
46 Chapter 4 Removal and replacement procedures
Memory modules are designed with a notch (3) to prevent incorrect insertion into the
Spare part number
500768-001
500767-001
500766-001
456805-001
507116-001
507117-001
507115-001
495386-001