Modem Module - HP 550 Maintenance And Service Manual

Modem module

NOTE: The modem module spare part kit does not include a modem module cable. The modem
module cable is included in the Cable Kit, spare part number 456594-001.
Description
For use in the United States
For use in Australia and New Zealand
Before removing the modem module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Speaker (see
f. Display lid switch module (see
g. Display assembly (see
h. Top cover (see
i. System board (see
Remove the modem module:
1. Turn the system board upside down, with the USB connectors toward you.
2. Remove the two Phillips PM2.5×4.0 screws (1) that secure the modem module to the system board.
76 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page 40)
Optical drive on page
Keyboard on page 50)
Switch cover on page
Speaker on page 53)
Display lid switch module on page
Display assembly on page
Top cover on page 60)
System board on page
39).
46)
48)
55)
66)
Spare part number
461749-001
461749-011
54)