Speaker - HP 550 Maintenance And Service Manual

Hide thumbs Also See for 550:
Table of Contents

Advertisement

Speaker

Description
Speaker
Before removing the speaker, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the keyboard (see
6.
Remove the switch cover (see
Remove the speaker:
1.
Disconnect the speaker cable (1) from the system board.
2.
Remove the two Torx T8M2.5×4.0 screws (2) that secure the speaker to the top cover.
3.
Remove the speaker (3) from the top cover.
Reverse this procedure to install the speaker.
Battery on page
39).
Keyboard on page
50).
Switch cover on page
48).
Component replacement procedures
Spare part number
456593-001
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents