Driver Only Installation - Aztech Wireless N USB Adapter User Manual

User Manual
To connect to a wireless network:
1. When you complete the installation, a new icon appears in the System tray -
Double-click this icon to open WL950USB Utility.
2. Click Site Survey.
3. Select an ESSID and then click Join. The Privacy Configuration dialog box opens
when a Network key is required from the selected ESSID. Enter the Network key,
confirm the Network key, and then click OK. The System tray icon changes to
either of the following:
•
- You have a good or excellent connection to a wireless network
•
- You have usable but weak connection to a wireless network
•
- Searching or not connected to a wireless network

Driver Only Installation

To install only the driver files in Windows XP:
1. Connect the device to an available USB port. This opens the Found New Hardware
Wizard.
2. Select No, not this time, and click Next.
3. Select Install from a list of specific location (Advanced), and then click Next.
4. Insert the Resource CD into your CD-ROM drive, select Search removable media
(floppy, CD-ROM...), and then click Next.
5. To complete the installation, click Finish.
Page 10 of 29
.