Advanced; About; Resetting To The Factory Default Settings - Axis Q7404 User Manual

Advanced

Scripting
Scripting is an advanced function that enables you to customize and use scripts. This function is a very powerful tool.
Caution!
Improper use may cause unexpected behavior or even cause loss of contact with the unit. If a script does cause problems,
reset the unit to its factory default settings.
Axis strongly recommends that you do not use this function unless you understand the consequences. Note that Axis
support does not provide assistance for problems with customized scripts.
For more information, please visit the Developer pages at www.axis.com
File Upload
Files (e.g. web pages and images) can be uploaded to the AXIS Q7404 and used as custom settings. Uploaded files are accessed
through http://<ip address>/local/<user>/<file name> where <user> is the selected user access group (viewer, operator or
administrator for the uploaded file.
Plain Config
Plain Config is for the advanced user with experience of Axis video encoder configuration. All parameters can be set and
modified from this page. Help is available from the standard help pages.

About

Here you can find basic information about your video encoder. You can also view third party software licenses.

Resetting to the Factory Default Settings

To reset one video input to the original factory default settings, go to the System Options > Maintenance web page (as
described in Maintenance, on page 40).
To reset all parameters in all four video channels (including all four IP addresses) use the Control button on the side of the
video encoder (see Overview, on page 5) as described below:
Using the Control Button
To reset all four video channels to the factory default settings with the Control Button:
1. Disconnect the power adapter.
2. Press and hold the Control button while reconnecting the power.
3. Keep the Control button pressed until the four Status Indicators change to amber (this may take up to 15
seconds).
4. Release the Control button.
5. When the four Status Indicators change to green (which may take up to 1 minute), the process is complete and
the video encoder has been reset.
The unit now has the default IP addresses 192.168.0.90 for channel 1, 192.168.0.91 for channel 2, 192.168.0.92
for channel 3 and 192.168.0.93 for channel 4.
Note:
For other methods of setting the IP address, please refer to the Installation Guide that accompanies the product, or
download a copy from www.axis.com
AXIS Q7404 - System Options
41