Equinox Systems MEGAPORT Hardware Reference Manual page 43

Modular Full Modem Control Adaptor
To implement full modem control in a modular environment, Equi-
nox provides modular full modem control adaptors. These devices
consist of two short cables which are plugged into the appropriate
adjacent port jacks on an Equinox modular splitter. At the end of
the cables is a small housing with two jacks, one providing full
modem control and the other data only (see Figure 3-17). Refer to
the Equinox Ordering Guide for available adaptors and their part
numbers.
To even
numbered ports
To Modular
Splitter
To odd
numbered ports
8-wire RJ-45 4-wire RJ-11
Full Modem Control Data Only
Figure 3-17. Modular full modem control adaptor (PN 690242)
Connecting Devices to CS and FM Ports 37