Managing Mergepoint 5200 Sp Manager User Accounts - Avocent MergePoint 5200 Installer/User Manual

26 MergePoint 5200 Service Processor Manager Installer/User Guide
a. Select the group(s) or target(s) for which you wish to schedule tasks.
b. From the Operate drop-down menu, select: Power On, Power Off or Power Reset.
c. From the Schedule Task drop-down menu, select: Once, Daily, Weekly or Monthly.
d. From the Time menu(s), select the day, hour and minute for the task to occur. Options in
the Time menus vary according to your selections.
e. If you selected Daily, select the time of the day for the task to occur.
-or-
If you selected Weekly, select the day of the week and the time of day for the task to occur.
-or-
If you selected Monthly, select the day of the month and the time of day for the task
to occur.
5. Click Apply Changes.
To delete a scheduled task (for Admin users only):
1. Click the System tab.
2. In the top navigation bar, click Schedule. The Schedule Task window appears.
3. Select the task to delete.
4. Click Delete.
5. When prompted, confirm the action. The scheduled task will be deleted from the Schedule
Task window.

Managing MergePoint 5200 SP Manager User Accounts

You may create, modify and delete MergePoint 5200 SP manager user accounts. An account with
the username of
An Administrator account user is allowed to be deleted if it is not the only Administrator account
user in the SP manager. Each SP manager should have at least one Administrator account user.
Do not use reserved words for usernames. Reserved words that have special meaning for the SP
manager are listed under Reserved Words on page 59.
You specify a privilege of Admin, Operator or User for each account. The Admin privilege gives
the user full control over all settings and the ability to perform any SP manager operations, as well
as manage all of the target devices in the SP manager. An Operator privilege allows the user to
perform basic operations, modify a limited number of settings and manage assigned target devices.
A User privilege allows the user to view and query information of assigned target devices but
prevents the user from performing most operations and modifying most settings. For detailed
information about user privileges, see User Privileges on page 49.
You are also allowed to manage users in groups. You can create, edit and delete groups. You can
also select users and target devices for the group. After a user is added to a group, that user can
and the password of
admin
is configured and cannot be deleted.
admin