Avaya CCC Report Manager User Manual page 7

Report Server
Connection to Delta Server
Refresh
Language
Enable Log File
CCC Report Manager
User Manual
To connect to a different Delta Server within the network:
1. From the Configure menu, select Change Delta Server.
2. At the warning screen click OK. A screen will appear which indicates
that the Archiver has located the available Delta Servers. If the
required Delta Server is listed, select it and then click the Connect
button.
3. If the required Delta Server is not listed, click the Advanced button.
4. Select one of the options and then click the Search button.
5. Select the required Delta Server and then click the Connect button.
This option allows you to update the information displayed on the Archiver
screen.
To update information:
1. From the View menu, select Refresh.
To alter the interval at which the information is updated:
1. From the View menu, select Interval.
This option also allows you to select the interval at which the
information is updated. The intervals are 0.5, 1, 2, 5 and 30 seconds.
The default is set to 1 second.
2. Select on the required interval.
This option allows you to change the language of the Archiver.
To change the language:
1. From the Configure menu, point to Language.
2. Select the required language.
This feature is for Technical Support Engineers use only. The option
allows you to save all the rejected messages onto a disk file.
When the Archiver Enable Log File option on the Configure menu is
selected, the Archiver will write any rejected messages along with the
reason for rejection to a log file.
The log file is created is "C:\ Archiver.log".
This option is for support purposes and should only be enabled at the
request of Technical Support personnel.
Note: To close the Archiver screen, from the File menu, select Close.
To quit the Archiver application, from the File menu, select Stop and Exit.
40DHB0002USBD Issue 1 (06/06/2001)
Archiver
Page 7