Horizon Fitness LIMITED LS760T User Manual page 6

AS SE MB LY S TEP 3
HARDWARE BAG 3 CONTENTS :
BOLT (G)
20 mm
Qty: 4
CROSS BAR
E MAST
A Open HARDWARE BAG 3.
B With running deck in lowered position, place CONSOLE on the console masts. Align the
brackets that are underneath the console with the top holes of the console masts.
C To assemble the CONSOLE to the LEFT CONSOLE MAST, insert 1 BOLT (G),
1 SPRING WASHER (H) and 1 FLAT WASHER (B) into the 2 holes in the
LEFT CONSOLE MAST and lightly tighten.
D Gently lift RIGHT side of the CONSOLE to connect the CONSOLE CABLE. Carefully tuck wire
in mast to avoid damage. NOTE: Do not pinch console cable or grip pulse wires.
E Repeat STEP C above to assemble the RIGHT CONSOLE MAST to the CONSOLE.
F Leave console bolts loose until after STEP 4 is completed.
10
LS760T_Treadmill_Rev.1.4.indd 10-11
SPRING WASHER (H) FLAT WASHER (B)
15 mm 20 mm
Qty: 4 Qty: 4
CONSOLE CABLE
CONSOLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
BOLT (G)
CONSOLE MAST
FLAT WASHER (B)
SPRING WASHER (H)
BOLT (G)
ASS EMBLY STEP 4
HARDWARE BAG 4 CONTENTS :
BOLT (I)
15 mm
Qty: 4
CONSOLE MAST
SUPPORT BAR
A O pen HARDWARE BAG 4.
B A lign SUPPORT BAR with holes in CONSOLE MASTS.
C nsert BOLTS (I) into all 4 holes of the SUPPORT BAR. I
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
D T ighten all console bolts (Step 3) and support bar bolts (Step 4) completely.
BOLT (I)
11
6/11/07 1:49:01 PM