A SS EMB LY ST EP 5
HARDWARE BAG FOR STEP 5 CONTENTS :
�����������������
�����
������
��������������
�����������������
��������
���������������
���������
A ) Open HARDWARE BAG FOR STEP 5.
B) Align LOWER LINK ARM with U BRACKET.
CAUTION: Be careful to keep the LOWER LINK ARM aligned with guide rail. Do not twist it to the left or right
while positioning it on the U BRACKET.
C) Insert 2 TEFLON WASHERS (M) between the FOOT PLATE TUBE and the U BRACKET.
D) Slide SPACER (N) through U BRACKET and FOOTPLATE TUBE.
E) Insert FLAT WASHER (C) and BOLT (O) into outside end of FOOTPLATE TUBE to secure LOWER LINK ARM to
PEDAL ARM.
F) Repeat on other side.
10
Elite 3.2E 4.2E Elliptical Rev 1.0.indd 10-11
����������
����������
������
��������
���������������
�����
�����
������
������
���������
�����������������
��������
��������������
���������
����
���������������
����������
������
����������
�����������
�������������
���������
����������
ASSEMBLY STEP 6
HARDWARE BAG FOR STEP 6 CONTENTS :
������
������
����
���������
��������������
������������������
A) Open HARDWARE BAG FOR STEP 6.
B) Insert SPACER (P) into LOWER LINK ARM.
C) Insert 2 TEFLON WASHERS (M) between the LOWER LINK ARM and LOWER HANDLEBAR.
D) Attach LOWER LINK ARM to LOWER HANDLEBAR using BOLT (Q) and NUT (R).
E) Attach INSIDE & OUTSIDE ELBOW COVERS together using 2 SCREWS (S).
F) Repeat on other side.
��������
�����������������
�����
�����
������
������
����������
���������
�����
����������
�������
�����
������
������
������
���������������
��������
�������
����������
�������������������
������������������
����������
11
7/13/05 2:48:05 PM