Table of Contents
Advertisement
2.1. INSTALLATION PROCEDURES
2.1.1. BATTERY INSTALLATION
CAUTION
Ensure the function switch is in the off position before installing
a battery.
Install the battery as follows:
1. observe Figure 2-1 for right position of the threaded insert ac-
cording to the battery to be installed.
2. Unscrew the battery compartment cap and check the insert po-
sition.
3. Change the insert position in the cap if necessary.
4. Install the battery into the battery compartment. Follow battery
symbol on the sight body (Figure 2-2).
5. replace the battery compartment cap.
BATTery CoMPArTMeNT CAP
AA BATTery
FIGURE 2-1.
INSERT POSITIONS IN THE
BATTERY COMPARTMENT CAP
2-2
Cr 123A
BATTery
INSerT
FIGURE 2-2.
BATTERY INSTALLATION
Advertisement
Table of Contents
