Page 1
Trident Pro 2 Trident Pro 4 Trident Pro 6 ATn Trident pro u s e r ` s g u i d e Important Export Restrictions! Commodities, products, technologies and services contained in this manual are subject to one or more of the export control laws and regulations of the U.S.
15.3” x 4” x 2.8” Weight 2 lb Diopter adjustment +/-5 * ATN reserves the right to change the above specifications at any time without notice pREpARATIon FoR opERATIon Before getting started make sure to follow these Battery steps: installation •...
The ATN Night Vision Riflescopes Mounting System allows to change the position of the riflescope flexibly on the weapon in relation to a shooter in combination with the fixed positions already available on the weaver rail. For this purpose in the base of the mounting bracket there is a rail with a fixing projection.
Screw IR Windage RETIclE ATN Trident Pro reticle gives a clearly aiming point, even when hard-to-see game blends into the background. Posts and crosshairs center section covers a minimum of the target and allow for less target coverage, making precision shots on small target easy.
And cAuTIons • Always remember to turn off the ATN Trident Pro scope when it is not in use. If you do not plan on using your scope for a period of more than 10 days, you should remove the batteries.
ATN, at its option, will either repair or replace the product, and such action on the part of ATN shall be the full extent of ATN’s liability, and the Customer’s sole and exclusive remedy. This warranty does not cover a product (a) used in other than its normal and customary manner;...