ATN PS-40 Operator's Manual page 25

Night vision front sights
Hide thumbs Also See for PS-40:
Table of Contents

Advertisement

4. Turn the power switch to the oN position. A green glow will ap-
pear in the scope eyepiece (after a slight delay).
5. observe the scene and adjust focus rotating focusing ring to
achieve sharp image.
CAUTION
Bright sources such as light of fire, headlights, searchlights,
etc. can damage the PS-40. Avoid exposing the PS-40 to these
types light sources.
6. Adjust image tube brightness using the gain control knob
(MGC version of the sight) to achieve the best possible image
contrast.
7. If the riflescope has focusing rings (parallax adjustment knob),
adjust focus for parallax free image.
8. If the scope has reticle illumination, switch it on and adjust
reticle brightness.
9. PS-40 Shut-Down:
a) Turn the function switch to oFF position. The green of the
image intensifier tube glow will fade to black.
b) replace the protective cover on the input lens.
c) If necessary remove the sight from the rail (from the scope
lens) remove the sight in reverse order of the installation
instructions.
d) Unscrew the battery cap and take out the battery. replace
the battery cap. Do not store the PS-40 with the battery
still in it.
e) return the sight and all accessories to the case.
2-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps40 mgc

Table of Contents