General; Scope; Reports; Storage - ATN PS-40 Operator's Manual

1.1 GENERAL INFORMATION

1.1.1. SCOPE

This manual contains instructions for use in operating and main-
taining the ATN PS-40 and PS-40 MGC Night vision Front Sights.
Throughout this manual, the ATN PS-40 and PS-40 MGC will be
referred to as the sights or the PS-40.

1.1.2. REPORTS

reports from the user on recommendations for improvements are
encouraged. Send reports to the address below.
American Technologies Network Corp.

1.1.3. STORAGE

Storage of the PS-40 should be done in the factory packing and
after a thorough PMCS as outlined in Section Iv of this manual.
This will ensure the sight remains in mission ready condition dur-
ing storage. Battery should be stored separately from the sight.
The PS-40 should not be placed on the floor, in any area exposed
to high temperatures or direct sunlight. Presence of acid and al-
kaline vapor, as well as of other aggressive admixtures in the air
is unacceptable.
1-2
1341 San Mateo Avenue
South San Francisco, CA 94080
(800) 910-2862
(650) 989-5100
(650) 875-0129 fax
www.atncorp.com
info@atncorp.com