Deleting A Volume; Expanding A Raid-5 Volume - Planet NAS-3410 User Manual

4-slot nas raid server
Table of Contents

Advertisement

RAID 0
RAID 1
RAID 5
Hot Spare
Write-Once Volume:
When setting a Write-Once volume, you are not allowed to erase or change what you have written
on this volume. This setting CANNOT be reverted in any situation, please think it twice before you
enable it.

5.3 Deleting a Volume

To delete a volume, go to the Volume Delete page. Select the volume to be deleted and click
the Delete button. Please be very careful because all data in the volume will be destroyed and the
RAID configuration will be erased also. All hard disk members in this volume will become free
disks after the deletion.

5.4 Expanding a RAID-5 Volume

RAID-5 volume expansion makes it possible to enlarge volume capacity without rebooting the
NAS-3410. Volume capacity grows on the fly. Moreover, you do not have to change any share
permissions, security controls and quota settings after volume expansion. Storage management
becomes much easier.
To expand a RAID-5 volume, please go to the Volume Expand page. Select a RAID-5 volume to
be expanded. Then choose the free disks as new members. Click Apply to submit changes. The
progress of RAID expansion is shown on the Volume Information page.
28
RAID level 0 is disk striping only, which distribute data
evenly over multiple disks for better performance. It
does not provide safeguards against failure.
RAID level 0 uses two or more hard disks.
RAID level 1 uses disk mirroring, which provides
100% duplication of data. It offers high reliability, but
doubles storage cost.
RAID level 1 uses two hard disks.
RAID level 5 distributes data and parity bits over
multiple disks for both performance and fault
tolerance. A RAID volume can still work when a hard
disk fails.
RAID level 5 uses three or more hard disks. Building a
RAID-5 volume may take hours depending on
capacity.
The hot-spare disks are global, which means they are
not bound to any specific RAID volumes. Whenever a
RAID volume goes degraded because of a bad hard
disk, a hot-spare disk will be taken immediately to
recover that RAID volume.

Advertisement

Table of Contents
loading

Table of Contents