Chapter 3 Setup Wizard - Planet NAS-1101 User Manual

The Setup Wizard guides you to finish the initial installation of NAS-1101, and the basic configurations for
Network. Please follow the steps as below.
Note: If you have run the Setup Wizard before and for some reason you need to run the Wizard again,
please delete the previously created shortcuts first.
1. Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once completed a menu
screen will appear.
2. Click on "Setup Wizard" hyper link to initiate the program. If the menu screen is not shown, you can
click the "Start" button and choose "Run". When the box appears, enter "E:\Utility\setup.exe"
(Suppose "E" is your CD-ROM drive). You will see the Welcome screen as below. Please click
"Next" to continue.
3. Plug the circle end of power adapter firmly into the rear panel of NAS-1101, and the other end into a
power outlet. Press the Power button on NAS-1101 and make sure Power LED is light on.

Chapter 3 Setup Wizard

5